CO2 Art U-Bend Glass Tubing Connector + 4x Suction Cups – Medium – Max

Description

U-Shaped Glass CO2 Tubing Connector
Made of high-quality glass.
U Shape for Co2 System.
Provide nice alignment for tubing goes over the glass edge from outside to the inside of the tank.
For 4/6mm tubing.

CO2 Art U-Bend Glass Connector (Medium) for Tidy Tubing

This medium U-bend glass connector solves a small but persistent annoyance: routing CO2 tubing cleanly over the rim of a rimless or braced tank without kinking the line. The glass U sits over the tank edge, taking the 4/6mm tubing from outside down into the water in a smooth curve, so flow to your diffuser stays consistent and the run looks intentional rather than draped. On a display tank where the hardscape is the star, hiding messy plumbing makes a real visual difference.

Glass holds up far better than plastic against our climate and the constant moisture around an open-top tank, and it will not yellow or grow brittle the way cheap fittings do. The four suction cups let you anchor the tubing run on the outside glass so the line does not sag or pull on your diffuser inside the tank. Pick the medium size where your tubing run needs a slightly longer reach over a deeper rim.

See the rest of our cleaning & maintenance accessories to finish your setup. For dialling in your gas system, our CO2 guide and diffuser guide pair well with this fitting.