ANS Water Elbow/Bend Connector (9/12/16/20mm)

ANS Water Elbow/Bend Connector (9/12/16/20mm)

#joint #pipe #piping #hose #valve

ANS Water Elbow / Bend Connector (9/12/16/20mm)

Routing aquarium plumbing neatly is half the battle in a tidy setup, and the ANS Water Elbow lets you turn a hose run through a clean 90-degree bend without kinking the tubing. In Singapore homes where canister filters often sit inside a closed cabinet beneath the tank, these elbows help you guide inflow and outflow lines around tight corners so flow stays smooth and unrestricted. They come in 9, 12, 16 and 20mm to match the common hose diameters used here.

A kinked hose quietly chokes your filter, starving the biofilter of oxygen and weakening flow at the outlet, so a proper bend connector is more than cosmetic. We recommend matching the connector size to your tubing exactly and securing each joint with a hose clamp, since a slow drip inside a cabinet can go unnoticed until it warps the wood. Push fittings fully home onto clean, dry hose ends for the most reliable seal.

Find matching fittings in our cleaning-maintenance range. For sizing and sealing, read our hose and tubing guide and our hose clamps and connectors guide.