Aquaforest Phosphate Minus (Absorbs Phosphate) – (250/1000/5000ml)

Efficient medium for fluidization filters.
Too much food and supplements may be the cause of too high phosphate levels. Due to the unique technology Phosphate Minus effectively reduces phosphate and silicate levels in marine aquariums. Its adsorbing capabilities allow bonding large amounts of phosphate without negative influence on the aquarium inhabitants.
Reduce phosphate and silicate levels in a marine aquarium
Phosphate Minus is highly recommended both in new and in matured aquariums. In freshly set aquariums it prevents occurring high phosphate levels and in matured aquariums it reduces PO4 levels and stabilizes water chemistry. Due to maintaining the biological balance in the tank, it prevents the formation of undesirable green algae and the development of cyanobacteria.
Stabilize water conditions
Dosage: 25-100 ml per 100 l (27 US gal) of water. Phosphate Minus should be placed in media reactors with suggested water flow of at least 400 l/hr. It’s also suitable for a passive use in filter socks. Phosphate Minus should be replaced every 4 weeks or during significant rise of phosphate levels in the water. Shortly after placing in a filtration system, the product may slightly colour water. Although, Phosphate Minus should not be rinsed before use, brown dust is an active phosphate remover and is completely harmless for the aquatic life. Brown colouration of water will disappear after a short time. Rinsing the product in a RODI water will lower its efficiency.

What is great about this product?

Restores chemical balance
Prevents cyanobacteria development
Helps reduce/eliminate algae blooms or algae growth
Safe for tank inhabitants
Perfect for new & matured aquariums

Good to know

*Overdosed Phosphate Minus won’t work efficiently
*Inefficient filtration may be the reason of high phosphate levels
*A violent drop of nitrate and phosphate levels can destroy zooxanthellae and lead to corals death
*Satisfactory levels for fish only aquarium: PO4 0,00-0,03 mg/l
*Satisfactory levels for reef aquarium: PO4 0-0,02 mg/l

See What It Looks Like Here

Aquaforest9.31k subscribersAquaforest Phosphate MinusAquaforestSearchInfoShoppingTap to unmuteIf playback doesn’t begin shortly, try restarting your device.You’re signed outVideos that you watch may be added to the TV’s watch history and influence TV recommendations. To avoid this, cancel and sign in to YouTube on your computer.CancelConfirmShareInclude playlistAn error occurred while retrieving sharing information. Please try again later.Watch LaterShareCopy linkWatch on0:000:00 / 5:50•Live•

An error occurred.

Try watching this video on www.youtube.com, or enable JavaScript if it is disabled in your browser.

Aquaforest Phosphate Minus: Phosphate And Silicate Control For Reefs

Phosphate Minus is an adsorption media for fluidised reactors that pulls phosphate, and silicate, out of marine water, helping you keep nuisance algae and dull corals in check. It binds large amounts without harming tank inhabitants, which makes it suitable for both new systems, where it heads off early phosphate spikes, and mature tanks carrying a nutrient load from years of feeding. The 250ml, 1000ml and 5000ml sizes cover everything from a nano to a large display.

For best results run it in a media reactor with gentle flow so the granules tumble lightly rather than packing or blowing apart. We tell local reefers to lower phosphate gradually, a sudden crash can stress corals as much as high phosphate does, so use a modest amount, test, and add more only if needed. Replace the media once it’s exhausted, since spent media stops adsorbing.

Browse the full filter media range, and read our phosphate media comparison with our phosphate management guide to run it effectively.