EDEN Aquarium pump – 105/109/114/126/128

Description

You can use the Eden aquarium pump for filtering and water circulation in your fresh and saltwater aquarium.
With the Eden aquarium pump you rely on a compact, yet powerful pump that is completely quiet. Eden aquarium pumps are ideal for underwater use and can be used for filtering as well as for water circulation. The motors of this series are characterised by high performance, smooth running and low energy consumption. They are equipped with thermal overload protection for trouble-free continuous operation. You can continuously regulate the flow rate. The design of the rotor and the running unit ensures smooth running and a particularly long service life of the rotor.
The Mini Eden Pumps 105/109 are a miniaturised version that features a low consumption, high performance motor that in operation is very quiet. These pumps are particularly suitable for filtration and water circulation in small aquariums, table top fountains, to create rivers and cascades in small features and plastic models, etc
The Compact Eden Pumps 126/128 models feature a unique impeller with two antifriction bearings and vibration absorbers, creating an extremely quite and long lasting rotor system
Features:

Compact and powerful
For underwater use
High performance and smooth running
With thermal overload protection
Stepless flow control
For fresh and saltwater

Technical details Eden 105

Suitable for aquariums up to: 50 l
Dimensions (L x W x H): 60 x 80 x 135mm
Nominal voltage: 230 V.
Power consumption: 5 W.
Cable length: 1.5 m
Litres per hour: max. 300 l / h
Meters of water: 0.50 m
Suitable for freshwater: yes
Suitable for saltwater: yes

Technical details Eden 109

Suitable for aquariums up to: 80 l
Dimensions (L x W x H): 60 x 80 x 135mm
Nominal voltage: 230 V.
Power consumption: 5 W.
Cable length: 1.5 m
Litres per hour: max. 500 l / h
Meters of water: 0.80 m
Suitable for freshwater: yes
Suitable for saltwater: yes

Technical details Eden 114

Suitable for aquariums up to: 100 l
Dimensions (L x W x H): 80 x 90 x 135mm
Nominal voltage: 230 V.
Power consumption: 11 W
Cable length: 1.5 m
Litres per hour: max. 600 l / h
Meters of water: 1.30 m
Suitable for freshwater: yes
Suitable for saltwater: yes

Technical details Eden 126

Suitable for aquariums up to: 130 l
Dimensions (L x W x H): 80 x 90 x 135 mm
Nominal voltage: 230 V.
Power consumption: 20 W.
Cable length: 1.5 m
Litres per hour: max. 800 l / h
Meters of water: 1.50 m
Suitable for freshwater: yes
Suitable for saltwater: yes

Technical details Eden 128

Suitable for aquariums up to: 190 l
Dimensions (L x W x H): 80 x 90 x 135 mm
Nominal voltage: 230 V.
Power consumption: 25 W.
Cable length: 1.5 m
Litres per hour: max. 1150 l / h
Meters of water: 2.00 m
Suitable for freshwater: yes
Suitable for saltwater: yes

EDEN aquarium pumps (105/109/114/126/128) for SG setups

This series of compact submersible pumps covers a useful range of flow ratings, so you can pick the model that matches your tank rather than over- or under-powering it. We see them used for internal filtration, driving small hang-on or internal filters, feeding a chiller or reactor loop, and simply adding circulation to clear dead spots. The quiet, smooth-running motors make them a sensible choice for HDB and condo homes where pump hum carries through quiet rooms at night.

Choosing the right flow matters: too little and you get stagnant corners and patchy filtration, too much and you stress small fish or shrimp and blast a planted layout. As a rough planted-tank starting point we aim for several times tank volume turned over per hour, then fine-tune with the outlet position. Rinse the impeller and intake sponge regularly, as our warm 27-29C water encourages biofilm that can slow a pump over time.

You’ll find it in our filtration and equipment range. Match the model with our flow rate guide, understand your options via our filter types guide, and keep it silent with our pump noise reduction guide.