SHIRUBA XB Series Replacement Parts (XB303, 305, 308, 310, 312)

Description

Parts,

XB308 – Impeller
XB310 / XB312 – Impeller
XB312 – Part Kits (Tube/Valve)
XB303 – O-Ring (1 large/2 small)
XB308 – O-Ring (1 large/4 small)
Motor seat gasket x1,
Water inlet group O-ring x2
Quick connection group O-ring x2
XB310 / XB312 – O-Ring (1 large/4 small)
XB308 / XB310 / XB312 – Outlet Pipe set
XB303 / 305 / 308 – Inlet Pipe set
XB310 / 312 – Inlet Pipe set
XB303 / 305 – FC-07 Cartridge (2pcs per box)
Polyester Mat 5Pcs (White)
CA-312S12 Replacement Valve (12mm – 2pcs per pack)
CA-312S16 Replacement Valve (16mm – 2pcs per pack)
XB303 – (Black) Filter Sponge – 1 piece
XB308 – (Green) Filter Sponge – 1 piece
XB308 – (Black) Filter Sponge – 1 piece
XB310 / 312 – (Green) Filter Sponge – 1 piece
XB310 / 312 – (Black) Filter Sponge – 1 piece

Parts Information / Reference Pictures,

XB310 & XB312 – Impeller

XB303/ 305/ 308 Inlet Pipe set
Compatible with XB303 & XB308
Shiruba original dedicated water inlet pipe set

Hose inner diameter: 12 mm
Hose outer diameter: 16 mm

Includes,

Water inlet pipe x2
Water inlet pipe x1
Water inlet and outlet elbow x1
Water inlet pipe biochemical cotton x1
Suction cup x4
Suction cup holder (short) x2
Suction cup holder (long) x2

XB310 / 312 – Inlet Pipe set
Compatible with XB310 & XB312
Shiruba original dedicated water inlet pipe set

Hose inner diameter: 16mm
Hose outer diameter: 22mm

Includes,

Water inlet pipe x3
Water inlet pipe x1
Water inlet and outlet elbow x1
Suction cup x3
Suction cup holder (short) x3
Suction cup holder (long) x3

SHIRUBA XB series spare parts for your canister filter

Keeping a canister filter running smoothly comes down to having the right consumables on hand, and this range covers impellers, O-rings, inlet and outlet pipe sets, sponges and valves across the XB303 through XB312 models. Worn O-rings are the usual culprit behind weeping seals and lost priming, while a chipped or fouled impeller shows up as weak flow and rattle. Matching parts to your exact model avoids the frustration of near-fits that never seal properly.

In Singapore’s warm, humid conditions, rubber seals perish faster and impeller shafts pick up biofilm, so periodic refreshes keep flow and silence where they should be. We suggest noting your model number and keeping a spare O-ring set ready, since a holiday is the worst time to discover a flat impeller. Always smear silicone-safe lubricant on new O-rings and reseat them gently before closing the head.

See the wider filtration equipment range, and read our canister filters compared and filter media guide to keep your XB unit performing.