CONTINUUM Basis KH Liquid Buffer (increase marine KH)

Description

High quality, multi-component blended true buffering system
Raises the alkalinity or buffering capacity of marine fish and reef aquariums and automatically regulate the pH
Holds pH stable over a wide range of conditions providing for safety of the entire system.

Reef Basis KH Buffer is a high quality, multi-component blended true buffering system designed to raise the alkalinity or buffering capacity of marine fish and reef aquariums and automatically regulate the pH. It will hold pH stable over a wide range of conditions providing for safety of the entire system.

Use in aquarium keeping.
Proper control of pH is one of the most critical functions of a marine fish or reef aquarium. Continuum recommends that you maintain an alkalinity level of 7 to 11 dKH (2.5 to 4 meq/L) and a pH of 8.3. *Note: Aquarists keeping SPS corals should consider keeping alkalinity at 7 to no more than 9 dKH (2.5 to 3.21 meq/L).
Do not add simultaneously with calcium or mineral supplements, wait 30 minutes minimum and allow for plenty of circulation prior. Alternate days is even better. By waiting, you will avoid unnecessary precipitation and possible cloudiness.

Directions and protocol.

Dissolve 2 grams, about 1/2 teaspoon of product in 8 oz. ( 236 ml ) purified water.
Add in an area of high flow directly to the aquarium for each 20 gallons ( 76 L ) capacity, per day until the desired pH and KH are reached.
For best results, measure the alkalinity and add as necessary to maintain the desired alkalinity between 7 and 11 dKH ( 2.5 to 4 meq/L ).

Expert use.
To dose, determine the amount of alkalinity consumption during the time it takes add the entire volume of your drip system. Determine the amount of ReefBasis KH Buffer to add to your drip system in grams by multiplying your tank capacity in gallons by the amount you want to raise it in meq/L by .32 or in dKH by .114 ( Example: if you have a 20 gallon tank and you want to raise the level by 1 meq/L with the entire dose, you would multiply 20 x .32 x 1 which equals 6.4 grams or about 1 teaspoon of Basis KH powder. Or if you want to raise it by 1 dKH, you would multiply 20 x .114 x 1 = 2.28 grams or about 1/3 teaspoon of Basis KH powder.)

Caution: Keep out of reach of children. Not for human consumption.
Contains strongly alkaline carbonic acid salts, if ingested drink plenty of water, consult your medical practitioner.
If in eyes flush with water for 15 minutes, if redness continues, consult your medical practitioner.
If on skin flush with water.

Continuum Basis KH Liquid Buffer for easy reef alkalinity dosing

The liquid version of Basis KH is what we recommend to Singapore reefers who prefer to dose without mixing powders, or who run automatic dosing pumps. It is the same borate-free, multi-component buffering system, supplied ready to use so you can dial in small, repeatable additions. In our experience that suits nano and mixed reefs in HDB and condo flats, where space is tight and you want a clean bottle-to-tank workflow rather than a kitchen full of measuring scoops.

Because our tanks run warm and corals grow steadily, alkalinity tends to fall a little each day. A liquid buffer makes it simple to add a daily maintenance dose that matches consumption, keeping dKH and pH stable instead of letting them sag and then spike after a correction. We still stress testing: dose to a target you measure, not a number you guess.

For setting up dosing properly, see our reef dosing schedule guide and how to raise alkalinity. More options sit in our marine additives range.