SUNSUN JP Water Pump (600 – 1600 L/Hr)

Description

East Ocean Aquatic is the official distributor for SunSun.
Get your SunSun products from us for an assurance and peace of mind!
JP water pump are usually use as replacement pump for sunsun aquarium which comes with top filtration
***For the JP Pump to function as intended, do ensure that the pump sits below the water line at all times.
Failure to do so may result in overheating and/or damages to the pump.

JP500GS
Rated voltage 220V-240V
Rated frequency 50Hz
Rated power 6W
Maximum Pump Height 0.75m
Maximum Flow Rate 600L/Hr
Outlet Diameters
Power cord length 140cm
Dimensions 80x42x48mm
JP700GS
Rated voltage 220V-240V
Rated frequency 50Hz
Rated power 15W
Maximum Pump Height 1.2m
Maximum Flow Rate 800L/Hr
Outlet Diameters
Power cord length 140cm
Dimensions 90x51x100mm
JP900GS
Rated voltage 220V-240V
Rated frequency 50Hz
Rated power 20W
Maximum Pump Height 1.4m
Maximum Flow Rate 1000L/Hr
Outlet Diameters
Power cord length 140cm
Dimensions 95x58x110mm
JP1100GS
Rated voltage 220V-240V
Rated frequency 50Hz
Rated power 25W
Maximum Pump Height 1.6m
Maximum Flow Rate 1200L/Hr
Outlet Diameters
Power cord length 140cm
Dimensions 100x65x115mm
JP1500GS
Rated voltage 220V-240V
Rated frequency 50Hz
Rated power 30W
Maximum Pump Height 1.9m
Maximum Flow Rate 1600L/Hr
Outlet Diameters
Power cord length 170cm
Dimensions 105x65x120mm

Water Pump
Powerhead
Power Head
Over Head Filter

SUNSUN JP Water Pump (600-1600 L/Hr) Replacement Pump in Singapore

This JP series, supplied via East Ocean Aquatic as the official SunSun distributor, is commonly used as the replacement pump for SunSun aquariums that run a built-in top filter. If your all-in-one tank’s original pump has worn out, matching the correct JP model restores the intended flow through the overhead filter chambers. Models range from the JP500GS upward, covering a useful spread of flow rates and lift heights.

These pumps must sit below the water line at all times; running one dry will cause overheating and damage, so always check the level after a water change. In our 27-29C ambient, keeping the top filter flowing properly is what maintains the biological filtration your fish depend on between maintenance. When choosing a replacement, match the flow rate and outlet to your original pump so the filter chambers and any spray return behave as designed.

Find the right unit in our water pumps range. Our best aquarium water pump guide and the flow rate guide will help you confirm the correct model.