OASE HeatUp Heater – Precision Temperature Control (25-400L Capacity)

Description

Product Highlights,

Uniform temperature levels – Temperature levels are monitored and controlled by bi-metal technology for automated heating, includes a thermal shutoff switch for added protection
Durable – High quality, double insulated quartz glass, created to withstand greater temperature fluctuations than glass
Only operate with water at a water temperature of +4 °C to +35 °C.
Only use indoors and for aquaristic purposes in the home (not for commercial use).
Filter integration capabilities – Integrate this heater into the BioPlus 200, FiltoSmart 200, or BioMaster 350 to combine filtration and heating into one location (Use the ThermoFit to secure the heater into the FiltoSmart 200 filter)
Easy installation: Including holder
Function check: The heating function is displayed via the activated control light
Made in Italy, backed by German engineering

Technical Specifications,
– 3 Years warranty
– Suitable for freshwater & saltwater setups

Heatup 25
Dimensions (Ø x H) mm 23 x 205
Rated voltage 230 V / 50 Hz
Power consumption W 25
Power cable length m 1.50
Net weight kg 0.20

Heatup 50
Dimensions (Ø x H) mm 23 x 205
Rated voltage 230 V / 50 Hz
Power consumption (w) 50
Power cable length (m) 1.50
Net Weight (kg) 0.20

Heatup 100
Dimensions (Ø x H) mm 23 x 245
Rated voltage 230 V / 50 Hz
Power consumption (w) 100
Power cable length (m) 1.50
Net Weight (kg) 0.22

Heatup 150
Dimensions (Ø x H) mm 23 x 315
Rated voltage 230 V / 50 Hz
Power consumption (w) 150
Power cable length (m) 1.50
Net Weight (kg) 0.25

Heatup 200
Dimensions (Ø x H) mm 23 x 315
Rated voltage 230 V / 50 Hz
Power consumption (w) 200
Power cable length (m) 1.50
Net Weight (kg) 0.25

Heatup 300
Dimensions (Ø x H) mm 23 x 370
Rated voltage 230 V / 50 Hz
Power consumption (w) 300
Power cable length (m) 1.50
Net Weight (kg) 0.28

Heatup 400
Dimensions (Ø x H) mm 23 x 440
Rated voltage 230 V / 50 Hz
Power consumption (w) 400
Power cable length (m) 1.50
Net Weight (kg) 0.34

***NOTE***

Before switching on, ensure that the heater is immersed in water at least up to the marking for the minimum immersion depth.
Wait approx. 30 minutes before switching on so that the thermostat can adjust to the temperature of the water.
Route the power connection cable such that it forms a drip loop!
To Switch on: Connect the unit to the mains. The unit switches on immediately.
To switch off: Disconnect the unit from the mains.

Do You Need the OASE HeatUp Heater in Singapore?

Honest local advice first: many Singapore tanks sit comfortably at 27-29C ambient and never call for a heater at all. Where the OASE HeatUp earns its place is in air-conditioned bedrooms and study rooms, where the unit runs cool overnight, or for species that prefer stable warmth above our occasional cool, rainy spells. Its bi-metal control and thermal shutoff give you a dependable floor temperature so fish are not left riding swings caused by an aggressive aircon.

The double-insulated quartz glass is built to tolerate temperature fluctuation better than standard glass, which matters when a monsoon power outage cuts circulation and the heater later restarts against cooler water. Sized for tanks from 25 to 400 litres depending on wattage, it also integrates into compatible OASE BioPlus 200, FiltoSmart 200 and BioMaster 350 units for a tidier, hidden install in an HDB or condo setup.

Compare options in our heating and cooling range, and check our heater wattage sizing chart plus our temperature fluctuation guide before you buy.